Fetal Biometric Parameter Reference Charts of a Central Anatolian Turkish Population.

PURPOSE: The assessment of fetal biometry using ultrasound provides accurate pregnancy dating and also screening of fetal growth. Fetal biometry, which is common practice in the second and third trimesters of pregnancy, is fetal morphometry, which involves taking measurements of the different anatomical body parts. These fetal dimensions vary on ethnicity. The aim of this study is to demonstrate fetal biometric parameters measurement results of the Central Anatolia Turkish population with detailed percentile tables and graphs to screen fetal growth more accurately. METHODS: This cross-sectional study was performed on a total of 1132 fetuses (47% girl, and 53% boy) between 15 and 40 weeks of gestation. Biparietal diameter (BPD), head circumference (HC), abdominal circumference (AC), and femur length (FL) measurements are performed in a standardized manner every gestational week. BPD and HC were measured at the level of the thalami on the horizontal plane of the fetal head. HC was measured using the ellipse method. AC measurement was taken at the circular cross-section of the upper fetal abdomen. FL was measured along with the ossified diaphysis of the femur. All measurements were taken in millimeters. RESULTS: Pregnant women's mean age was 27.58 (17-43), and the mean body mass index was 27.68 (15.06-50.78) as demographic data. 38.13% of women had their first, 29.74% had their second, and 32.13% had three or more gestations within our study. Percentile data of fetuses for each parameter (BPD, HC, AC, and FL) and for each week were shown as tables and percentile graphics. Fetal 50th percentile measurements were compared between our study and other studies from different countries. The Kruskal-Wallis test results showed that BPD (p = 0.827), HC (p = 0.808), AC (p = 0.846), and FL (p = 0.725) values have a statistically similar mean in all studies. Hierarchical cluster analysis results showed that our results for BPD, HC, AC, and FL percentile curves have been found closer to Italian population results. However, our results were statistically different from Asian, Nigerian, non-Hispanic American, and Brazilian populations for each of the different parameters. CONCLUSION: The specialization of fetal biometric charts for a particular population can ensure a more accurate assessment of fetal growth rate. We showed fetal biometric percentile tables and graphics of the Central Anatolian Turkish population in this study. These results may provide a valuable contribution to obstetrical practice. Further studies can be conducted in different regions of Turkiye, thus comparisons could be possible over the country.

Assessment of fetal corpus callosum biometry by 3D super-resolution reconstructed T2-weighted magnetic resonance imaging.

Objective: To assess the accuracy of corpus callosum (CC) biometry, including sub-segments, using 3D super-resolution fetal brain MRI (SR) compared to 2D or 3D ultrasound (US) and clinical low-resolution T2-weighted MRI (T2WS). Method: Fetal brain biometry was conducted by two observers on 57 subjects [21-35 weeks of gestational age (GA)], including 11 cases of partial CC agenesis. Measures were performed by a junior observer (obs1) on US, T2WS and SR and by a senior neuroradiologist (obs2) on T2WS and SR. CC biometric regression with GA was established. Statistical analysis assessed agreement within and between modalities and observers. Results: This study shows robust SR to US concordance across gestation, surpassing T2WS. In obs1, SR aligns with US, except for genu and CC length (CCL), enhancing splenium visibility. In obs2, SR closely corresponds to US, differing in rostrum and CCL. The anterior CC (rostrum and genu) exhibits higher variability. SR's regression aligns better with literature (US) for CCL, splenium and body than T2WS. SR is the method with the least missing values. Conclusion: SR yields CC biometry akin to US (excluding anterior CC). Thanks to superior 3D visualization and better through plane spatial resolution, SR allows to perform CC biometry more frequently than T2WS.

Atypical phacolytic glaucoma diagnosed by biometry and anterior segment optical coherence tomography (OCT) in a patient with CMV anterior uveitis.

PURPOSE: To report a case of phacolytic glaucoma with atypical presentation in a patient which was diagnosed with biometry swept source optical coherence tomography (SS-OCT) and anterior segment spectral domain OCT (SD-OCT). METHODS: A 56-year-old male with a history of cytomegalovirus (CMV) chronic anterior uveitis in the right eye presented with a white cataract, minimal anterior chamber reaction and intraocular pressure (IOP) of 56 mmHg. Visual acuity was light perception. The anterior chamber was deep, without evidence of macroscopically visible capsular rupture. A surgical intervention was necessitated with the puzzle being whether to proceed with a trabeculectomy or a combined phaco-trabeculectomy. After a routine preoperative assessment with intraocular lens Master700, the disintegration of the natural lens was noticed. Anterior segment Spectralis OCT confirmed a lamellar separation of the anterior one third of the lens, resembling a poultaceous material. After an uneventful phacoemulsification, visual acuity was 6/6, IOP was well-controlled on maximum topical antiglaucoma treatment and no CMV recurrence was observed. RESULTS: The diagnosis of phacolytic glaucoma was established with the aid of current imaging OCT systems. Both OCT images were suggestive of a phacolytic nature of our case, despite the fact that the clinical presentation was not in concordance with such a typical case. In view of our findings the decision was to proceed with cataract extraction alone. CONCLUSION: This is the first time that we image and document the phacolytic nature of a natural lens. Our patient did not have the typical clinical presentation and was differentially diagnosed with biometry SS-OCT and confirmed by anterior segment SD-OCT.

Comparison of IOL Power Prediction Accuracy between Two Swept-Source OCT Biometry Devices.

PURPOSE: To compare intraocular lens (IOL) power prediction accuracy of the Eyestar 900 (EyeS900) and the IOLMaster 700 (IOLM700) based on estimated and measured posterior corneal power DESIGN: Retrospective, inter-instrument reliability study METHODS: Setting: Institutional. PARTICIPANTS: 225 eyes of 225 cataract surgery patients. MEASUREMENTS: Patients underwent measurements by both devices preoperatively. MAIN OUTCOME MEASURES: Spherical Equivalent Prediction Error (SEQ-PE), spread of the SEQ-PE (Precision) and the absolute SEQ-PE (accuracy) of each device using Barrett Universal II (BUII) formula with either estimated posterior keratometry (E-PK) or measured posterior keratometry (M-PK). RESULTS: Trimmed mean SEQ-PEs of EyeS900 E-PK, EyeS900 M-PK, IOLM700 E-PK and IOLM700 M-PK were 0.03, 0.08, 0.02 and 0.08 D, respectively with no significant differences between EyeS900 E-PK and IOLM700 E-PK (p=0.31) as well as between EyeS900 M-PK and IOLM700 M-PK (p=0.31). Statistically significant SEQ-PE differences were found when E-PK and M-PK were compared, regardless of the device used, showing hyperopic SEQ-PE in M-PK calculations. Excellent correlation and agreement in SEQ-PE were found between the devices for both E-PK (p<0.001,r=0.848, mean bias:+0.01 D, 95% LOA of -0.32 to +0.34 D) and M-PK (p<0.001,r=0.776, mean bias:-0.01 D, 95% LOA of -0.42 to +0.39 D). No significant differences were found comparing absolute SEQ-PE and precision of the devices. CONCLUSION: The Eyestar 900 and the IOLMaster 700 show comparable IOL power prediction accuracy by the BUII formula using either estimated or measured posterior keratometry. An adjusted lens factor may be required for BUII when utilizing measured posterior keratometry in both devices.

Food grain quality: Analysis of physical, biometric, and colorimetric properties to promote consumption.

This research focused on analyzing the biometric, colorimetric and morphological characteristics of thirty seeds, covering legumes, cereals and oilseeds. Thirteen legumes, fourteen cereals and three oilseeds were collected from three different locations. The methodology used was descriptive, applying multivariate multiple factorial and cluster analysis. The results showed variability between biometric, chromatic and morphological characteristics among the seeds. Predominant shapes include circular, oval, oblong, less frequently kidney and lanceolate. Significant differences in biometric parameters stand out, evidencing similarities in colorimetric parameters. Specifically, Pallar and Bean exhibited greater equatorial dimensions, length, weight, 100 g weight, area and perimeter, While peanut and Chickpea presented greater thickness. In terms of colorimetry - luminosity, Pallar, Yellow corn and Tarwi presented higher values unlike Black lentils, Purple corn and Black beans, being less luminous. Multivariate tests revealed the formation of four groups based on the parameters studied. This study provides valuable information about the different seeds, establishing a basis for their propagation and improvement in the Peruvian context.

Characterizing nursing time with patients using computer vision.

BACKGROUND: Compared to other providers, nurses spend more time with patients, but the exact quantity and nature of those interactions remain largely unknown. The purpose of this study was to characterize the interactions of nurses at the bedside using continuous surveillance over a year long period. METHODS: Nurses' time and activity at the bedside were characterized using a device that integrates the use of obfuscated computer vision in combination with a Bluetooth beacon on the nurses' identification badge to track nurses' activities at the bedside. The surveillance device (AUGi) was installed over 37 patient beds in two medical/surgical units in a major urban hospital. Forty-nine nurse users were tracked using the beacon. Data were collected 4/15/19-3/15/20. Statistics were performed to describe nurses' time and activity at the bedside. RESULTS: A total of n = 408,588 interactions were analyzed over 670 shifts, with >1.5 times more interactions during day shifts (n = 247,273) compared to night shifts (n = 161,315); the mean interaction time was 3.34 s longer during nights than days (p < 0.0001). Each nurse had an average of 7.86 (standard deviation [SD] = 10.13) interactions per bed each shift and a mean total interaction time per bed of 9.39 min (SD = 14.16). On average, nurses covered 7.43 beds (SD = 4.03) per shift (day: mean = 7.80 beds/nurse/shift, SD = 3.87; night: mean = 7.07/nurse/shift, SD = 4.17). The mean time per hourly rounding (HR) was 69.5 s (SD = 98.07) and 50.1 s (SD = 56.58) for bedside shift report. DISCUSSION: As far as we are aware, this is the first study to provide continuous surveillance of nurse activities at the bedside over a year long period, 24 h/day, 7 days/week. We detected that nurses spend less than 1 min giving report at the bedside, and this is only completed 20.7% of the time. Additionally, hourly rounding was completed only 52.9% of the time and nurses spent only 9 min total with each patient per shift. Further study is needed to detect whether there is an optimal timing or duration of interactions to improve patient outcomes. CLINICAL RELEVANCE: Nursing time with the patient has been shown to improve patient outcomes but precise information about how much time nurses spend with patients has been heretofore unknown. By understanding minute-by-minute activities at the bedside over a full year, we provide a full picture of nursing activity; this can be used in the future to determine how these activities affect patient outcomes.

Determination of progressive endothelial cell loss after posterior chamber phakic intraocular lens implantation.

Comments about endothelial cell loss after posterior chamber phakic intraocular lens are provided, with a particular emphasis on the importance of determining progressive postoperative cell density reduction, excluding that related to surgical trauma.

Thoracic Biometry in Patients with Congenital Diaphragmatic Hernia, a Magnetic Resonance Imaging Study.

This is a retrospective study investigating biometric measurements using magnetic resonance imaging (MRI) examinations in congenital diaphragmatic hernia (CDH). CDH is one of the more common causes of pulmonary hypoplasia, with grave consequences for the fetus. Inclusion criteria were patients diagnosed with CDH as the only observed anomaly, who underwent MRI examination after the second-trimester morphology ultrasound. The patients came from three university hospitals in Bucharest, Romania. In total, 19 patients were included in the study after applying exclusion criteria. Comparing the observed values of the thoracic transverse diameter, the thoracic anterior-posterior diameter, the thoracic circumference, the thoracic area, and the thoracic volume with values from the literature, we observed a predictive alteration of these parameters, with most showing Gaussian distribution. We observed statistical significance for most of our correlations, except between the observed and expected thoracic anterior-posterior diameters and the observed and expected thoracic volume values. This is very helpful when complex studies that can calculate the pulmonary volume cannot be obtained, as in the case of movement artifacts, and allows the clinicians to better assess the severity of the disease. MRI follow-up in CDH cases is a necessity, as it offers the most accurate thoracic biometry.

Estimation of angle parameters by ASOCT and biometric parameters by optical biometer in eyes with occludable angles and open angles.

PURPOSE: To compare anterior chamber angle (ACA) parameters measured by Anterior Segment Optical Coherence Tomography (ASOCT) and biometric parameters measured by Swept-Source (SS) OCT-based biometry among patients with suspected occludable angles and open angles. METHODS: An analytical, cross-sectional study was performed on subjects attending our ophthalmology outpatient department with suspected occludable angles (van Herick grades 0, 1, and 2) in group 1, and with open angles (van Herick grades 3 and 4) in group 2. Each subject underwent a complete ophthalmic examination to exclude any intraocular pathology like cataract. We recruited 128 eyes of 64 subjects, 34 in group 1 and 30 in group 2. Each eye was henceforth subjected to ASOCT (Spectralis, Heidelberg Engineering, Heidelberg) and SS-OCT-based optical biometry (IOL Master 700, Carl Zeiss Meditec AG). Anatomical parameters were recorded and compared between the two groups. RESULTS: The main outcome measures of the study included nine ASOCT parameters (central corneal thickness [CCT], lens vault, AOD750, ACA, TISA750 [nasal and temporal], and ACW) and five optical biometric parameters (CCT, ACD, WTW, LT, and axial length). We found a significant difference (p < 0.05) among all the anatomical parameters between the two groups, except CCT which was not significantly different (p = 0.297). CONCLUSIONS: ASOCT and SSOCT biometry overcome the challenges of gonioscopy and allow screening for angle closure disease in otherwise normal subjects. ASOCT may serve as an alternative to gonioscopy as it clearly separates occludable angles from open angles in a non-invasive and objective manner.

Changes in Ocular Biometry Following PreserFlo MicroShunt Implantation and Trabeculectomy: A Prospective Observational Study.

Background This study aimed to evaluate postoperative changes in ocular biometry following initial PreserFlo MicroShunt implantation and trabeculectomy. Methodology This prospective, observational study analyzed 27 cases of PreserFlo MicroShunt implantation and 29 cases of trabeculectomy performed by a single surgeon. Visual acuity, intraocular pressure, corneal curvature, central corneal thickness, anterior chamber depth, and axial length were assessed at baseline and postoperatively at one day, one week, two weeks, one month, two months, three months, and six months. Patients requiring additional surgery and those with missing data were excluded. Consecutive data were compared with the baseline values using multiple comparisons. Results In both groups, intraocular pressure was significantly decreased from baseline at all postoperative time points (all p < 0.01). Visual acuity decreased in both groups at one day and one week postoperatively. Corneal curvature remained unchanged in both groups throughout the six-month follow-up. Central corneal thickness increased at one day and one week postoperatively in the PreserFlo group, but not in the trabeculectomy group. Anterior chamber depth exhibited a significant decrease at one week postoperatively in both groups. Axial length significantly decreased postoperatively until three months in the PreserFlo group and at all postoperative time points in the trabeculectomy group. Conclusions Ocular biometry following PreserFlo and trabeculectomy had a similar tendency postoperatively.

Eye morphometry, body size, and flexibility parameters in myopic adolescents.

The aim of this study was to investigate the anatomical and physiological ocular parameters in adolescents with myopia and to examine the relations between refractive error (SER), ocular biometry, body size and flexibility parameters in myopic adolescents. A cross-sectional study of 184 myopic adolescents, aged 15 to 19 years was conducted. Refractive error and corneal curvature measures of the eye were evaluated using an autorefractometer under cycloplegia. Central corneal thickness was determined by contact pachymetry. The ocular axial length, anterior and vitreous chamber depth, and lens thickness were measured using A-scan biometry ultrasonography. Height and body weight were measured according to a standardized protocol. Body mass index (BMI) was subsequently calculated. Beighton scale was used to measure joint flexibility. Body stature was positively correlated with ocular axial length (r = 0.39, p < 0.001) and vitreous chamber depth (r = 0.37, p < 0.001). There was a negative correlation between height and SER (r = - 0.46; p < 0.001). Beighton score and body weight had weak positive correlations with axial length and vitreous chamber depth, and a weak negative correlation with SER. A significantly more negative SER was observed in the increased joint mobility group (p < 0.05; U = 5065.5) as compared to normal joint mobility group: mean - 4.37 ± 1.85 D (median - 4.25; IQR - 6.25 to - 3.25 D) and mean - 3.72 ± 1.66 D (median - 3.50; IQR - 4.75 to - 2.25 D) respectively. There was a strong association between height and axial length, as well as SER. Higher degree of myopia significantly correlated with greater Beighton score (increased joint mobility).

Bi-Gaussian analysis reveals distinct education-related alterations in spherical equivalent and axial length-results from the Gutenberg Health Study.

PURPOSE: The aim of this study is to investigate the distribution of spherical equivalent and axial length in the general population and to analyze the influence of education on spherical equivalent with a focus on ocular biometric parameters. METHODS: The Gutenberg Health Study is a population-based cohort study in Mainz, Germany. Participants underwent comprehensive ophthalmologic examinations as part of the 5-year follow-up examination in 2012-2017 including genotyping. The spherical equivalent and axial length distributions were modeled with gaussian mixture models. Regression analysis (on person-individual level) was performed to analyze associations between biometric parameters and educational factors. Mendelian randomization analysis explored the causal effect between spherical equivalent, axial length, and education. Additionally, effect mediation analysis examined the link between spherical equivalent and education. RESULTS: A total of 8532 study participants were included (median age: 57 years, 49% female). The distribution of spherical equivalent and axial length follows a bi-Gaussian function, partially explained by the length of education (i.e., < 11 years education vs. 11-20 years). Mendelian randomization indicated an effect of education on refractive error using a genetic risk score of education as an instrument variable (- 0.35 diopters per SD increase in the instrument, 95% CI, - 0.64-0.05, p = 0.02) and an effect of education on axial length (0.63 mm per SD increase in the instrument, 95% CI, 0.22-1.04, p = 0.003). Spherical equivalent, axial length and anterior chamber depth were associated with length of education in regression analyses. Mediation analysis revealed that the association between spherical equivalent and education is mainly driven (70%) by alteration in axial length. CONCLUSIONS: The distribution of axial length and spherical equivalent is represented by subgroups of the population (bi-Gaussian). This distribution can be partially explained by length of education. The impact of education on spherical equivalent is mainly driven by alteration in axial length.

Leaving trusted paths: Estimating corneal keratometric index in cataract surgery eyes with zero-power implants.

PURPOSE: This study aimed to estimate the corneal keratometric index in the eyes of cataract surgery patients who received zero-power intraocular lenses (IOLs). METHODOLOGY: This retrospective study analyzed postoperative equivalent spherical refraction and axial length, mean anterior curvature radius and aqueous humor refractive index to calculate the theoretical corneal keratometric index value (nk). Data was collected from 2 centers located in France and Germany. RESULTS: Thirty-six eyes were analyzed. The results revealed a mean corneal keratometric index of 1.329 ± 0.005 for traditional axial length (AL) and 1.331 ± 0.005 for Cooke modified axial length (CMAL). Results ranged from minimum values of 1.318/1.320 to maximum values of 1.340/1.340. CONCLUSION: The corneal keratometric index is a crucial parameter for ophthalmic procedures and calculations, particularly for IOL power calculation. Notably, the estimated corneal keratometric index value of 1.329/1.331 in this study is lower than the commonly used 1.3375 index. These findings align with recent research demonstrating that the theoretical corneal keratometric index should be approximately 1.329 using traditional AL and 1.331 using CMAL, based on the ratio between the mean anterior and posterior corneal curvature radii (1.22).

Clinical Evaluation of a New Spectral-Domain Optical Coherence Tomography-Based Biometer.

The VEMoS-AXL system is a new optical biometer based on spectral domain optical coherence tomography (SD-OCT) that has been tested in terms of intrasession repeatability and compared with a swept-source optical coherence tomography biometer (SS-OCT), which is recognized as the gold standard for the performance of an agreement analysis. A biometric analysis was performed three consecutive times in 120 healthy eyes of 120 patients aged between 18 and 40 years with the SD-OCT system, and afterwards, a single measurement was obtained with the SS-OCT system. Within-subject standard deviations were 0.004 mm, 4.394 µm, and 0.017 mm for axial length (AL), central corneal thickness (CCT), and anterior chamber depth (ACD) measures obtained with the SD-OCT biometer, respectively. The agreement between devices was good for AL (limits of agreement, LoA: -0.04 to 0.03 mm) and CCT (LoA: -4.36 to 14.38 µm), whereas differences between devices were clinically relevant for ACD (LoA: 0.03 to 0.21 mm). In conclusion, the VEMoS-AXL system provides consistent measures of anatomical parameters, being most of them interchangeable with those provided by the SS-OCT-based gold standard.

Automating the Human Action of First-Trimester Biometry Measurement from Real-World Freehand Ultrasound.

OBJECTIVE: Automated medical image analysis solutions should closely mimic complete human actions to be useful in clinical practice. However, more often an automated image analysis solution represents only part of a human task, which restricts its practical utility. In the case of ultrasound-based fetal biometry, an automated solution should ideally recognize key fetal structures in freehand video guidance, select a standard plane from a video stream and perform biometry. A complete automated solution should automate all three subactions. METHODS: In this article, we consider how to automate the complete human action of first-trimester biometry measurement from real-world freehand ultrasound. In the proposed hybrid convolutional neural network (CNN) architecture design, a classification regression-based guidance model detects and tracks fetal anatomical structures (using visual cues) in the ultrasound video. Several high-quality standard planes that contain the mid-sagittal view of the fetus are sampled at multiple time stamps (using a custom-designed confident-frame detector) based on the estimated probability values associated with predicted anatomical structures that define the biometry plane. Automated semantic segmentation is performed on the selected frames to extract fetal anatomical landmarks. A crown-rump length (CRL) estimate is calculated as the mean CRL from these multiple frames. RESULTS: Our fully automated method has a high correlation with clinical expert CRL measurement (Pearson's p = 0.92, R-squared [R2] = 0.84) and a low mean absolute error of 0.834 (weeks) for fetal age estimation on a test data set of 42 videos. CONCLUSION: A novel algorithm for standard plane detection employs a quality detection mechanism defined by clinical standards, ensuring precise biometric measurements.

Artificial intelligence assistance for fetal development: evaluation of an automated software for biometry measurements in the mid-trimester.

BACKGROUND: This study presents CUPID, an advanced automated measurement software based on Artificial Intelligence (AI), designed to evaluate nine fetal biometric parameters in the mid-trimester. Our primary objective was to assess and compare the CUPID performance of experienced senior and junior radiologists. MATERIALS AND METHODS: This prospective cross-sectional study was conducted at Shenzhen University General Hospital between September 2022 and June 2023, and focused on mid-trimester fetuses. All ultrasound images of the six standard planes, that enabled the evaluation of nine biometric measurements, were included to compare the performance of CUPID through subjective and objective assessments. RESULTS: There were 642 fetuses with a mean (±SD) age of 22 ± 2.82 weeks at enrollment. In the subjective quality assessment, out of 642 images representing nine biometric measurements, 617-635 images (90.65-96.11%) of CUPID caliper placements were determined to be accurately placed and did not require any adjustments. Whereas, for the junior category, 447-691 images (69.63-92.06%) were determined to be accurately placed and did not require any adjustments. In the objective measurement indicators, across all nine biometric parameters and estimated fetal weight (EFW), the intra-class correlation coefficients (ICC) (0.843-0.990) and Pearson correlation coefficients (PCC) (0.765-0.978) between the senior radiologist and CUPID reflected good reliability compared with the ICC (0.306-0.937) and PCC (0.566-0.947) between the senior and junior radiologists. Additionally, the mean absolute error (MAE), percentage error (PE), and average error in days of gestation were lower between the senior and CUPID compared to the difference between the senior and junior radiologists. The specific differences are as follows: MAE (0.36-2.53 mm, 14.67 g) compared to (0.64- 8.13 mm, 38.05 g), PE (0.94-9.38%) compared to (1.58-16.04%), and average error in days (3.99-7.92 days) compared to (4.35-11.06 days). In the time-consuming task, CUPID only takes 0.05-0.07 s to measure nine biometric parameters, while senior and junior radiologists require 4.79-11.68 s and 4.95-13.44 s, respectively. CONCLUSIONS: CUPID has proven to be highly accurate and efficient software for automatically measuring fetal biometry, gestational age, and fetal weight, providing a precise and fast tool for assessing fetal growth and development.

Five-year changes in macular thickness in the elderly population: A cohort study.

BACKGROUND: The aim of this study is to determine the 5-year changes in macular thickness and related factors. METHODS: Data were from the second (2014) and third (2019) phases of the Shahroud Eye Cohort Study. Examinations included measurement of uncorrected and best-corrected visual acuity, non-cycloplegic autorefraction, slit-lamp biomicroscopy, and funduscopy. Participants underwent Cirrus HD-OCT 4000 (Carl Zeiss Meditec, Dublin, CA). RESULTS: The 5-year changes (95% confidence interval) of central and overall macular thicknesses were - 3.48 ± 8.16 µ (-3.92, -3.03) and - 0.79 ± 4.06 µ (-1.03, -0.54), respectively. The median and IQR of 5-year changes in the central subfield thickness were -3 and 10, although they were 0 and 5 in the overall macular thickness, respectively. Multiple regression model showed the central macular thickness (CMT) decreased with a U-shape pattern with increasing age. The 5-year changes in CMT were significantly lower in females compared to males ß = -1.55; (-2.78, -0.32) and in smokers compared to non-smokers ß = -1.92; (-3.55, -0.28). Moreover, higher body mass index ß = -0.12; (-0.22, -0.02) and CMT at baseline ß = -0.08; (-0.10, -0.06) were significantly associated with lower CMT changes. The average 5-year changes in overall macular thickness showed a non-linear decrease with age and was significantly higher in females ß = 0.93; (0.4, 1.43). These changes were directly related to the anterior chamber depth ß = 0.87; (0.10, 1.64) in the baseline. CONCLUSIONS: The macular thickness decreased slightly after 5 years; however, this change is not clinically significant. Demographic factors such as age and sex and refractive errors were significantly related to macular thickness changes.

Central anterior chamber depth correlated with white-to-white distance in normal, long, and short eyes.

PURPOSE: To explore the associations between central anterior chamber depth (CACD) and other anterior segment biometric parameters and to determine the possible determinants of CACD in short, normal, and long eyes. METHODS: The biometric data of pre-operation patients aged 50-80 years with coexisting cataract and primary angle-closure disease or senile cataract were reviewed. Axial length (AL), CACD, lens thickness (LT), central corneal thickness (CCT), and white-to-white distance (WTW) were measured by Lenstar optical biometry (Lenstar 900). The data of 100 normal eyes (AL = 22 to 26 mm), 100 short eyes (AL ≤ 22 mm), and 100 long eyes (AL ≥ 26 mm) were consecutively collected for subsequent analyses. RESULTS: The mean age of the subjects was 66.60 ± 7.85 years, with 25.7% of the sample being men. Both CACD and WTW were found to be smallest in short eyes and were smaller in normal eyes than in long eyes (F = 126.524, P < 0.001; F = 28.458, P < 0.001). The mean LT was significantly thicker in short eyes than in normal and long eyes (4.66 mm versus 4.49 mm versus 4.40 mm; F = 18.099, P < 0.001). No significant differences were observed in CCT between the three AL groups (F = 2.135, P = 0.120). Stepwise regression analysis highlighted AL, LT, and WTW as three independent factors associated with CACD in the normal AL group. In the short AL group and long AL group, LT and WTW were independent factors associated with CACD. CONCLUSIONS: CACD increases as AL elongates and reaches a peak when AL exceeds 26 mm. Furthermore, CACD showed inverse correlation with LT and positive correlation with WTW. A relatively small WTW results in an anteriorly positioned lens, and thus, a decrease in CACD.

Humanitarian missions and visual outcomes in cataract surgery: A literature review.

The limited accessibility to ophthalmological services in remote regions of developing countries poses a significant challenge in visual healthcare. Cataracts and refractive errors are prominent causes of visual impairment, and surgery, despite being an efficient option, faces barriers in developing countries due to financial and geographical constraints. Humanitarian missions play a vital role in addressing this issue. The improvement in the accuracy of calculating IOL power through techniques such as keratometry and biometry is a fundamental step towards optimizing surgical outcomes and the quality of life for patients in these underserved regions. In this context, the consideration of keratometry and immersion ultrasound biometry as preoperative assessment standards in cataract surgeries in developing countries is presented as a pertinent and advisable strategy.

Evaluation of fetal kidney length as a marker for fetal biometry.

BACKGROUND: The precise determination of gestational age is essential for effectively managing and prognosis of all pregnancies. Through careful biometry, timely interventions can be implemented, leading to positive outcomes for both the mother and fetus. In routine fetal biometry, parameters such as biparietal diameter (BPD), femur length (FL), head circumference (HC), and abdominal circumference (AC) have been traditionally used. This study aims to evaluate the usefulness of fetal kidney length (FKL) as a marker for fetal biometry. METHODOLOGY: This prospective, observational, and cross-sectional study was conducted in the Radiodiagnosis and Obstetrics and Gynaecology departments, including a diverse group of pregnant women from various socio-economic backgrounds, with adherence to ethical standards. Women with singleton pregnancies between 22 and 40 weeks of gestation who met the inclusion and exclusion criteria were examined through ultrasound. The data collected were subsequently analyzed. RESULT: In the current study, 280 participants with an average age of 26.71 ± 3.6 years were included. The agreement between the mean fetal kidney length and standard biometry parameters was almost perfect, with a strength of agreement exceeding 0.99. A strong and statistically significant positive correlation existed between fetal kidney length and the estimated gestational period calculated using DLMP/standard biometric measurements. CONCLUSION: Fetal kidney length is a reliable indicator of gestational age and can supplement standard biometric measurements to provide a more precise estimation of gestational age, especially in the later stages when obtaining such standard measurements may be challenging.